-
```
Hello community! We need some HELP ...
We want to use RGB LED SMD 5050 by "X4-Life".
Connected to RaspberryPi & XBMC
Which config syntax we must use for our LED SMD 5050:
[DEVICE]
TYPE = ?
OUT…
-
안녕하세요 🙂
오랜만에 모노리스에 이슈가 생겨 해결하려고 왔다가 우연히 레포를 발견했네요. 둘러보다 커스텀 PCB를 보고 이슈 하나 남겨봅니다.
원래는 손땜으로 기판 만드는 자작차 팀들이 만들기 쉽도록 그냥 모듈째 꽂는 설계를 했었는데요, 그러다 보니 PCB가 너무 커져서 상당히 큰 단점이 되는 것 같더라고요. 그래서 시간이 되면 아예 모듈 없이…
-
## Hardware
ESP32
### RF Module
nRF24L01+
CMT2300A, Typ: E49-900M20S
### Antenna:
* [ ] circuit board
* [ ] external antenna (SMA)
### Power Stabilization:
3 x 22uF multilayer capacitor…
kiu77 updated
5 months ago
-
```
What steps will reproduce the problem?
- Open any .wdd and extract one or more Components.
What is the expected output? What do you see instead?
- Expected is that BlendWeight Indices on .wdd typ…
-
```
What steps will reproduce the problem?
- Open any .wdd and extract one or more Components.
What is the expected output? What do you see instead?
- Expected is that BlendWeight Indices on .wdd typ…
-
```
What steps will reproduce the problem?
- Open any .wdd and extract one or more Components.
What is the expected output? What do you see instead?
- Expected is that BlendWeight Indices on .wdd typ…
-
```
What steps will reproduce the problem?
- Open any .wdd and extract one or more Components.
What is the expected output? What do you see instead?
- Expected is that BlendWeight Indices on .wdd typ…
-
```
What steps will reproduce the problem?
- Open any .wdd and extract one or more Components.
What is the expected output? What do you see instead?
- Expected is that BlendWeight Indices on .wdd typ…
-
The current footprint accommodates a 32MHz crystal but needs to accommodate an 8-12MHz SMD crystal @3.3VDC. The common footprint size seems to be 5mm x 3.2mm dual pad. Representative [crystals at Mo…
-
I've used FDA code (v2021.7-fda2.11) to perform analysis on my polysaccharide system (SMD simulation).
I've obtained .pfa and .pfr files.
The scripts pfa_draw and pfa_loaduser are meant for both ato…