-
### The problem
Since the upgrade to core-2023.8.0 my Kasa kp-200 only has one working toggle causing both outlets to switch on/off. Both toggles show in the UI as do 1 device with 2 entities. If I t…
-
### The problem
The TP-Link KP125M smart plug is not recognized by the Home Assistant TP-Link Kasa Smart integration. Discovery finds no devices and adding it by IP address results in a "Failed to co…
-
The kasa version is on the sable branch. I having issues with discovery. I have 9 of kasa wall switches in my home and they are connected as a dhcp. The router is tp-link with the WPA3-Personal securi…
-
The readme page states: `emeter (where applicable) to return energy consumption information`.
How can I find out which devices support emeter before I buy one?
For instance, does [model HS105](h…
-
### The problem
I have a TP-Link Tapo P125M (the Matter variant) connected to Home Assistant to automate a lamp. It has been working fine, until a week ago the plug had a firmware update to 1.0.6. …
-
### The problem
### Whats the Problem?
TP Link device KP303(UK) powerstrip is showing all sockets as ON when any socket is turned on on the power strip
KP303(UK) has 3 sockets, if socket 1 is turne…
-
I'm running into an issue with a bit of a niche use case. I have a KC401 camera that exposes a sort of weird MJPEG stream that I can only seem to consume **via** ffmpeg. This command successfully cr…
-
### The problem
my devices will go offline randomly and HA shows in the integrations "Retrying setup: Unable to connect to the device: 192.168.0.1: [Errno 111] Connect call failed ('192.168.0.1', 999…
-
### The problem
Since upgrading to 2023.7, several of my Kasa devices are not accessible, and are listed as "Retrying Setup" in the integration page.
Affected devices are a KL130 bulb and two HS10…
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…