-
Is it possible to have the frequency field toggled in settings, so it's not shown on the screen?
-
Hi There
i have HA installed on a Raspberry Pi 4. I purchased this USB to RS485 and its connected to RS485 on my Sunsynk 8KW Inverter
https://www.robotics.org.za/index.php?route=product/product&pr…
-
First of all, for those who don't know you can set `verbosity=10` [here](https://github.com/robotastic/trunk-recorder/blob/master/trunk-recorder/recorders/p25_recorder_decode.cc#L87) to see raw P25 vo…
-
## Analista Devops
Vaga de Analista Devops Junior
Contratação imediata
## Atividades
- Gerenciar cloud e monitorar serviços;
- Gerenciar pipeline de CI/CD;
- Gerenciar ambientes de homolog…
-
### New Issue Checklist
* [ x] I have read and understood the [CONTRIBUTING guide](https://github.com/rs/SDWebImage/blob/master/.github/CONTRIBUTING.md)
* [ x] I have read the [Documentation](http…
-
Successfully built dsd-fme on termux.
What I fixed:
1. extract function `getTime()` in `src/dmr_bs.c`
2. remove `getTime()` definitions from `src/dmr_ms.c`, `src/p25p2_frame.c`
3. added `#includ…
-
On a trunked system, setup_systems() doesn't seem to throw any kind of error if the control channel cannot be found within the range of any of the sources.
-
First: Well done work! I like it :)
1.) Reset Call Hiistory:
Performing will leave at least one (the last) entry.
Solution: Replace line 1382 in dsd_ncurses.c
- for (short int k = 0; k < 9; k…
-
Please confirm that:
* [x] You have read and understood the [requirements for registration](https://tools.ietf.org/html/rfc8288#section-2.1.1).
* [x] You have checked [the registry](https://www.ia…
-
Hello @databunnysg,
`$ juju deploy cinder-databunny-driver
ERROR The charm or bundle "cinder-databunny-driver" is ambiguous.
To deploy a local charm or bundle, run juju deploy ./cinder-databunny-dr…