-
MQTT things stop receiving values after a null message has been send by the broker. Other clients, such as mosquitto_sub, continue working, therefore it seems to be a bug of the openhab MQTT plugi…
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See er…
-
Hello,
The Tasmota and Shelly devices transmit values to the Venus OS. However, I don't get any values from the opendtu WR (yellow marking). There are values in the opendtu.
Do I have an err…
-
Ok Rikkert,
So i have run into an issue which I wanna share.
I have been doing some testing with 3 temperature sensors.
My pi is next to fridge freezer so i put one in fridge, one in the freezer…
-
**Describe the bug**
The battery is fully loaded and the daly bms stops charging.
Shortly after it goes into sleep mode and doesn't respond on the uart interface.
In the WebInterface of the MP2 GX …
-
**Describe the bug**
On battery monitor using node-red
When no alarm property of dbus message in null but should be 0
"TypeError: Cannot read property 'hasOwnProperty' of null"
**To Reproduce**
…
-
**Describe the bug**
Just a white screen after update from 0.12 to 0.14.
You can still see the hotkeys in the web interface, but only white in the display area and on the display. No menu or other s…
-
### Describe the bug
When I connect a JBD BMS over bluetooth the connection drops randomly, all charger and loads stoped working.
### How to reproduce
See log....
### Expected behavior
BMS / …
-
**Describe the bug**
BMS turns off mppt charge controller at high power
Charge controller switches from "Ext.Control" to "Off", then to "Wakeup" and then back to "Ext.Control" then back to "OFF" -> …
-
**Describe the bug**
after entering a custom device name (e.g. "Battery") in the GUI under /device/name and a reboot, the default device name (e.g. "SerialBattery(JKBMS)") is set again
**To Reprod…