-
After update Klipper to the newest, no connection to mcu...
![image](https://user-images.githubusercontent.com/45575213/140396195-0f31527d-4fd0-4a76-a1b9-5cc831bc4f81.png)
cd ~/klipper
make men…
-
-
**Idea**
Filament spool holder with integrated load cell which uses HX711 as an amplifier and feeds moonraker with the data. If this part is done, next thing would be to request a support for custom …
-
The "software Configuration" page (https://docs.vorondesign.com/build/software/configuration.html)
Is missing a base configuration for the BTT Octopus board.
This is the board that many voron2.4 …
-
Is there a 3 hole version of this mod available for the other popular type of cable chains? Similar to this: https://github.com/VoronDesign/Voron-Afterburner/blob/master/STLs/Gantry/Direct_Feed/chain_…
-
The following STL files are missing from the https://github.com/VoronDesign/Voron-Legacy/releases/tag/V1.0 Zip, (the link from https://vorondesign.com/voron_legacy). But are in the one https://github.…
-
[https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/wile-e1/Deck_Panel_Support_Clips](url)
@wile-e1
wile.e-deck_panel_support_lower_adjustable(3-6mm).stp is the same file as wile.…
-
On the bleed air ports, I they're not fully extruded on the Rapido toolhead. Printed and can verify nothing passes through, looked at SS slice (with PIF settings) and confirmed, then took look at STL …
-
Subj, doesn't exist in step
Goury updated
2 years ago
-
With the current StealthAB model (currently Beta7), the inner and outer walls of the SB are likely to be connected via infill, and this leads to seam lines on the outer walls of the SB. More icky than…