-
iperf from 2 raspis with ath9k_htc drivers:
``` bash
root@raspberrypi:~# iperf -s -V
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85…
cmdrk updated
10 years ago
-
导出pdf的时候控制台无故打印 Qt: Could not initialize OLE (error 80010106)
代码如下：
using ConsoleApp1;
using Magicodes.ExporterAndImporter.Pdf;
var tplPath = Path.Combine(Directory.GetCurrentDirectory(), "Exp…
-
this should allow to limit the data rate for some protocol for specific use.
Typical use case is to expose a device to Score over oscquery and over osc to Open Stage Control.
Then Open Stage Control…
-
*zorxd:*
On my Archer C7 v2, since the upgrade from 18.06 to 19.07, I sometimes get very high latency on my 5 GHz wifi network:
This is when pinging a wireless client from the router itself.
ping…
-
*dangowrt:*
This bug has been existing as long as the ubiquiti loco xw 5 ghz hardware is around, probably what we are dealing with is a hardware bug in the AR9342 Rev. 2 chip. It is somehow hard to r…
-
Tried to install the nightly 2018-03-13-octopi-stretch-lite-0.15.0.img - and after a startup, I did a iwconfig to check the wireless LAN:
wlan0 IEEE 802.11 ESSID:"xxxxxx"
Mode:Manag…
-
## Environment
- Development Kit: ESP32-PICO-Kit
- Kit version (for WroverKit/PicoKit/DevKitC): v4.1
- Module or chip used: ESP32-PICO-D4
- IDF version (run ``git describe --tags`` to find …
-
Hi Lorenzo,
Thank you for your hard work getting the USB mode of the mt7612 working, it is quite usable!
I was wondering how it is possible to enable AP mode in your driver? I don't mind gettin…
-
@Shreyas0-7
I use the ap patch , when set ap as open mode get follow mesage
when use encryption mode , client can connect the ap
esp side log
I (389866) wifi:flush txq
I (389868) wifi:stop sw t…
-
I recently got a TP-Link AC1300 USB wireless device that I am planning to use as a hot spot - in essence, I will plug it into my Slackware 15.0 desktop (with a 5.15.27 kernel) and then will let hostap…