-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
```
For future implementation, this modified file will successfully work with the
SSD1305 and I2C.
Verified with Arduino Uno and 4.7k pullup resistors.
http://www.buydisplay.com/default/2-2-inch-12…
-
at the moment there is none and adding it would allow for more compact deauthers and other uses
-
I'm using a 128x32 pixel SSD1306 SPI OLED display connected to a Daisy Seed, using daisy::OledDisplay<daisy::SSD130x4WireSpi128x32Driver>. Whenever I display anything, it is offset 32 pixels in …
Len42 updated
1 month ago
-
Although there is support for the AdaFruit Monochrome 128x32 SPI OLED Graphic Display the I2C version isn't supported:
http://www.adafruit.com/products/931
Support is needed for the use of the I2C v…
-
Hi
I'm tryning to use the play parameter to send images to the matrix (I'm using ZeDMD with a 256x64 dots matrix), but if I send images larger than 128x32 (for example a 256x64 image) the image doe…
-
I believe this is an issue as i said my display is a GND VCC SCL SDA and it comes up with random dots on the screen no text, screen is an 128x32. I have tried both scl and sck versions of the 128x32 s…