-
Hi.
Sorry first time I've kinda done this.
I was massively confused about how my result for chan.value was above 2047 as I'm using the 12 bit ADC and have set it up as per the example code for t…
-
Hello,
the sensor is delivering the raw values in kohm. Is there a forumular for the conversion?
https://www.sgxsensortech.com/content/uploads/2015/02/1143_Datasheet-MiCS-6814-rev-8.pdf
The Data…
-
Presently this library uses the nomenclature `ref` for `in3`. This is because our Breakout Garden ADS1015 breakout has a voltage reference connected to this pin and it serves no other purpose.
Howe…
-
ti-ads1015 is registered with the same alias as ads1015 so kernel is trying to load both the same time
-
I need to output an analog voltage to control a battery charger. I got this chip already running with a python script but it seems very difficult to access this script via blocky/javascript so could y…
-
hello ,
i have aproblem with the TFT_eSPI ,
when i used it with the ads , the ads stop works ,
my ads configure on D1,D2 ,
when i used it i dont use the TFT , and when i use the TFT i dont use…
-
My project use 4 ads1015, i can read 3 ads1015 with ADDR connect to GND, VCC and SDA, but I can't work with ads1015 with ADDR connect to SCL.
Pls help me!
-
Battery Status does not work as described with Microsoft Laptop Go running Debian Sid
According to the Feature Matrix (https://github.com/linux-surface/linux-surface/wiki/Supported-Devices-and-Feat…
-
- [x] [Link Checker](https://validator.w3.org/checklink) にて https://chirimen.org/chirimen/gc/top/examples/ 内のリンクが壊れていないことを確認しておく
- [x] Raspberry Pi OS 32-bit 書き込む…書き込み中
- https://downloads.raspber…
-
Hi Alex,
I am in process of designing new PCB for home automation using Raspberry Pi Zero.I need your help in identifying proper pins for following hardware:
- I2C Bus for temperature, humidity,…