-
我们在使用 sdio 连接esp32 模块的时候遇到一个传送数据卡主的问题。具体情况如下，请帮忙澄清。非常感谢！！
以下是host cpu sdio driver的代码：
![image](https://gith…
-
I realize this might not be the clearest or most helpful, but I'm not even sure where to proceed.
I have some rtl8723bu and du modules. The bu modules actually appear to "just work" with the rtl8x…
karlp updated
2 years ago
-
AX3000（M81、RA81）刷入最新的几个固件（老固件没试），全都是一开无线，就过一会自己熄灯断网，ttl输命令无反应，测电压txrx1v，vcc1.8v
补充：是2.4G无线中继后开启2.4G无线
-
I'm running Ubunru 20.04.2 LTS and using usb wifi adapter TP-Link Archer T4U V3 as a hot spot
Connection is not stable and randomly is being lost within few hours intervals.
After each reboot an…
-
### The problem encountered
While investigating #24 I wanted to update to new latest revision.
OTA failed see logs bellow
### Firmware version
V3.2.7
### Steps for reproducing the error
…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration i…
-
Hello, I'm trying to build a wifi to eth bridge using a WT32-eth01 module. I used the wifi-router example as a template.
I managed to configure the BLE provisioning. I can connect to my local wifi…
-
Hello,
I am trying to implement the driver into MT7688 with OpenWRT 19.07. I successfully compiled the driver but cannot run it, everytime I insmod or modprobe the module, the system says:
> [ 17…
-
While setting up new robot brains, I noticed that 0.5.3 is not working correctly.
I get the following error which occurred with both long and short configurations. Both work with 0.5.2
```
2024-11-…
-
### Answers checklist.
- [X] I have read the [Rainmaker documentation](https://rainmaker.espressif.com/docs/get-started.html) and the issue is not addressed there.
- [X] I have updated my IDF branch …