-
Some of the AirLift breakouts use RGB LEDS instead of NeoPixels. It'd be nice to have an status indicator LED within the WiFiManager for cases when NeoPixels aren't present.
The AirLift Breakout fo…
-
## In brief
* The ItsyBitsy M4 appears capable of running the LEDs at a faster rate than currently set
* Current clock divider: `15` (*`SPI.setClockDivider((F_CPU + 4000000L) / 8000000L);`*)
* …
-
- [x] I confirm that this is an issue rather than a question.
## Bug report
Hyperion 2.0.0-alpha.7 crashes after setting up LED hardware with a segmentation fault
#### Steps…
-
I am trying to use FastLED with an ItsyBitsy M4. I made the edits to the 3 .h files discussed in #662 (in fact I replaced the entire library to be safe). The edits fixed the errors I was getting, ho…
-
I'm using a Wemos D1 mini with FastLED trying to control a set of WS2815 lights. (Specifically https://www.aliexpress.com/item/WS2815-DC12V-addressable-full-color-RGB-5050-LED-strip-60leds-m-5m-waterp…
-
https://forums.adafruit.com/viewtopic.php?f=57&t=124748
https://github.com/FastLED/FastLED/issues/476
-
Would be a useful feature to be able to tell from a distance whether the hotend is cold (e.g. green), heating (yellow) or hot (red).
An option for ambient (low light), working lights when repairing …
-
Since ItsyBitsy M4 is a viable main MCU board to use with the ESP32 co-processor, would be nice to be able to use the built-in DotStar as the status pixel instead of adding an external NeoPixel.
-
Trying to run code on the Trinket M0 with only the adafruit_bus_device, adafruit_fancyled, adafruit_register, led_animation, adafruit_amg88.mpy, adafruit_dotstar.mpy, and neopixel.mpy libraries instal…
jepye updated
5 years ago
-
I have tried nearly every library that exists regarding SPI and Apa102 for nodejs however they don't seem to produce any results, whereas the python script lights up flawlessly. I can see that the pyt…