-
### What happened?
The embedded Raspberry Pi Imager doesn't read IMAGER_REPO_URL in bootloader EEPROM.
Imager look for [rmem0](https://github.com/raspberrypi/rpi-imager/blob/686ad14308639b0589a297…
-
Hi all! Very new to this so please bear with me as I have ZERO idea what's going on. I bought a ender 3 and replaced all the things with a skr mini e3 v3, tft35 e3 v3.0, followed all the instructions …
-
Version 2.2.3 fails to compile on ESP32 board (or perhaps others too).
'FsFile::FsFile(const FsFile&)' is implicitly deleted because the default definition would be ill-formed
-
Please bear with me. It's been years since I've posted here.
Both grub4dos and grub4UEFI can't see partitions beyond a deleted partition on GPT drives.
Take a drive with a GPT partition table a…
-
Hi,
I have trying to Building the Glued linux system for beaglebone black industrial board under Ubuntu 18.04, but many errors occurs like alloca or other issue. Since the glued project has existed f…
-
I tried to use a 1GB SD card and it was not recognized. Is there a size/type of sd cards it does not support?
ogg1e updated
4 years ago
-
# Bug #
Partitions in use on /dev/sda, Error: checking for exclusive access to /dev/sda
```
May 10 13:00:39 install-to-disk.sh[22377]: Executing coreos-installer with the following options: inst…
alrf updated
5 months ago
-
Checklist
---------
- [ ] I have been made aware that if my problem can be summarized as _"I've created or tried to create a media using Rufus, and ..."_, and I am not including a log, **this i…
-
In order to use the low level BEER IDE driver with MSXDOS 2 it should be implemented as described in the "MSX DOS 2 System Specification". In the current implementation there are still some deviatio…
-
We are looking for someone looking deeper into ATmega2560 support!
This is copied from @per1234 in Issue #1
I managed to get the ATmega2560 to load a program from the SD card but it's far from idea…