-
While testing with f_TestSDP in "DesktopConfiguration global" mode, everything works on 1st screen. On second screen it works until desk is changed. In that moment pages "0 0", "0 1", "1 0" are omitte…
NsCDE updated
4 years ago
-
HIFI were unable to load a configuration, after some investigation it turned out that starting the cryomagnet Vi on NDXHIFI was crashing labview. Running the VI outside of SECI also lead to a crash, j…
-
// Create a relation
$relation = new Relation();
$relation->type = 'belongsTo';
$relation->singleton = true;
$relation->table = $this->stripPrefix($foreignKey->foreign_table_name);
…
-
- #### Context
Running SWTP 6800 simulation and testing the SWTBug Monitor with SWI based code. The simulation is exiting back to SIMH command line with the following error:
…
-
$routes->setDefaultNamespace('App\Controllers');
$routes->setDefaultController('Frontpanel');
$routes->setDefaultMethod('index');
$routes->setTranslateURIDashes(true);
$routes->set404Override();
…
-
- #### Context
I am writing an 88-2SIO device for the AltairZ80 simulator and have run into a problem with the multiplexer with an attached serial port that I cannot figure out.
The CP/M ba…
-
@Bopske I can't find this currently but it means the center container doesn't work properly when you have a shoutbox in there, can you see if you have more luck than I finding it?
-
We need to verify whether IC-910 support works as it should (i.e. full duplex) using the latest hamlib package. Fix it if it doesn't, and document how to set it up.
Access to an IC-910 is required …
csete updated
4 years ago
-
Attaching serial lines to the DZ device lacks consistency w.r.t. the "modem" setting, at least.
- #### the output of "sim> SHOW VERSION" while running the simulator which is having the issue
`…
-
See report here: https://www.tinyportal.net/index.php?topic=36334.msg297265#msg297265
I can reproduce it in both 2.0.15 and 2.1 RC2.
What I cannot yet figure out, is what exactly is missing: I hav…