-
For any reason some values are 0 after 6th March.
- I didn't change anything
- I tried to turn off / on the ESP32
- I tried to turn off / on the JK-BMS
Still working:
- cell voltage 1-8
- min…
-
**Describe the bug**
Just a white screen after update from 0.12 to 0.14.
You can still see the hotkeys in the web interface, but only white in the display area and on the display. No menu or other s…
-
### Describe the problem
I updated to the latest dev-Version and rebooted the GX. It never established the serial connection again. After returning to the latest Version of the master branch it worke…
-
**Describe the bug**
The battery is fully loaded and the daly bms stops charging.
Shortly after it goes into sleep mode and doesn't respond on the uart interface.
In the WebInterface of the MP2 GX …
-
Tried both JK02/04. I am sure its something simple I am missing here. Using RPI4 4gb
`jkbms -p C8:47:8C:F3:75:92 -P JK02 -D`
```
2021-10-23 17:17:55,859:INFO:__init__:main@195: So…
-
### Describe the bug
Is the Daly BMS balancing deactivated? If so how to activate as I can't seem to figure it out.
### How to reproduce
On remote console
### Expected behavior…
-
**Describe the bug**
I don‘t know if it is a bug, but at two installed systems the SoC shown by serialbattery falls.
mit works around three weeks perfekt. Voltage was around 3,45V the SoC was 99%. …
-
### Describe the problem
Hello,
i am using a Jaibaida AP21S002 21S 300A BMS with the RS485/USB Interface. If i use the JBDTools on Windows i get Data from the BMS. With Venus OS on RASP-Pi i see t…
-
**Describe the solution you'd like**
I'd like to see, if balancing is active
**Additional context**
It would be nice to see, if the balancing on the BMS is switched on or off.
-
**Describe the bug**
During startup of serialbattery the values printed seems not to be correct. However, viewing cell voltage level via console seems to be right
**To Reproduce**
Use Jbd bms and…