-
Guru Meditation Error: Core 0 panic'ed (Store access fault). Exception was unhandled.
Core 0 register dump:
MEPC : 0x4205061a RA : 0x42050612 SP : 0x3fca6c80 GP : 0x3fc8c600…
-
Hello Team,
I bought two Jetracer pro AI ki
I have followed the instruction mentioned in the wiki page and downloaded the lastest 4.5 package zip file and flashed in microSD card( 62GB, UHS1). H…
-
### Board
ESP32-C3-WROOM-02
### Device Description
The module is mounted on a custom PCB, along with 3 i2C sensors, a OLED display and a i2S based SPH0645 microphone. All GPIO are being used.
…
-
This is sort of a term I coined, but the idea is to have LEDs act as displays. The widgets would be parameterized by PWM brightness, LED number (as in which LED to use; like colors or just linear posi…
-
A few hours worked nicely OLED displayed a record on MicroSD worked. Now, but the OLED does not display and LED flashes on the GPS module. And the red LED does not light on the main board with Atmel c…
-
Hardware: wemos D1 r1 + P10 LED matrix
Arduino version: 1.8.10
DMD2: 0.0.3
follow by the follow issue, I connect the D1 and LED matrix
[https://github.com/freetronics/DMD2/pull/7#issue-97282971…
-
Software 5.11.2.31
TL:DR: Need to restart Prismatik or recongigure the device to get Adalight working again after Adalight (WLED) LED string is power cycled.
I have WLED controller powering a LE…
-
Instead of going through the "nuage" (backend server) to make the requests to the various services, experiment requesting the values straight from the client.
The slides (tiles) and items (values d…
-
Hello Zeller,
I am developing an application where it is required to have a very high refresh rate, the application requires a camera to take a photo at a certain instant of the LED matrix display,…
-
When displaying anything other than a full white screen, single LEDs on the strips will start flashing in random colors. If the whole screen is red for example, some individual LEDs will rapidly flash…