-
Please include the following information when submitting a bug report:
*PyCom board*: LoPy
*firmware version*: 1.9.0.b2
## Steps to reproduce the bug:
```python
from machine import Timer
imp…
-
In an attempt to resolve the issue "Atom just updated and this message appeared - Failed to activate the Pymakr package #35" advise was to remove / replace with develop version of Pymakr and recompile…
-
Last night I was investigating a high packet error rate in the traffic received by lora_receive_realtime.
I had been observing a PER of 30% with code prior to v0.6.2, and had been seeing a very predi…
g0hww updated
6 years ago
-
The program below measures ESP-32 interrupt delay. Two pins are connected by a wire, with the destination detecting a rising edge from the source via interrupt.
After applying the rising edge on t…
-
Failed to connect (Error: Error: Broken pipe, cannot drain)
-
Hi
I am using your exact code and the nanogateway is connecting to ttn . On startup I get a ValueError 868100000 . If I use frequency=903900000 I get no errors . I updated the firmware 2 days ag…
-
Just moving this issue from the pymakr-atom repo as I created in the wrong repo.
History: [https://github.com/pycom/pymakr-atom/issues/31](https://github.com/pycom/pymakr-atom/issues/31)
Still h…
-
[Enter steps to reproduce:]
1. ...
2. ...
**Atom**: 1.17.2 x64
**Electron**: 1.3.15
**OS**: Microsoft Windows 10 Home
**Thrown From**: [Pymakr](https://github.com/pycom/pymakr-atom) package …
-
I was trying out the over-the-air (OTA) firmware update functionality and after a small tweak was surprised I could actually:
1. Build a new image
2. Upload the newly built appimg.bin to /flash/sy…
-
Board: LoPy running firmware 1.7.8.b1
Problem:
The LoRaWAN stack on the LoPy only accepts downlinks sent to port 1 and 2. Downlinks sent to other valid ports (3 - 223) don't trigger an RX_PACKET_E…