-
Consider:
```python
from machine import Pin, PWM
pin = Pin(23, Pin.OUT)
pwm = PWM(pin, freq=38000, duty=338)
```
This works as expected. If you issue **ctrl-d** the waveform on the pin continues…
-
I have designed a custom pyboard used STM32L432KC as the controller and downloaded both V1.12 and V1.13 NUCLEO_L432KC as the firmare. Neither of them works,the file system can not be loaded. I can not…
-
In either the web or electron version no matter what python board selected ... neither the code view or code save result in python code being generated ...
-
Following the instructions of how to add a module I do get the following error.
```
CC mymodule.c
mymodule.c:16:5: error: unknown field 'name' specified in initializer
.name = MP_QSTR_mymodul…
-
hello Wei Lin! I'm from china I'm 17 age
I'm so sorry,I came too late,so that i didn't see the content of the URL in the MD file you released ,if you can please send it to me ,or re-maintain the UR…
-
Hi, i was wondering if support for the mlx90640 via i2c could be added. I can see there is support for the version of the board with the serial output but the sensor in its most basic form is i2c. It …
-
The microcontrollers support counting rising/falling edges at rather fast pace (1-10kHz), eg to measure RPM of a motor with hall sensor or disc encoder. It would be nice to have the interrupt handling…
-
I had done follow the instruction:
> Select the top level folder of the project in the path browser of "Run/Debug Configurations".
BUT it shows:
> Python files must end in ".py".
-
Hi,
I need transpose this project:https://github.com/neuberfran/OpenElectrons_i2c/blob/master/OpenElectrons_i2c.py
from python to micropython, but I have issue:
![Captura de Tela 2019-06-04 a…
-
Hi All,
So I've seen people having this issue "device not configured" for me, I know it's not hardware issue because I've been running MicroPython without a problem and the BH1750 sensor is soldered …