-
-
system awareness of shield vs. not-shield
for shield:
- remove i2c headphone errors
- "sleep" needs to be clarified because the device doesn't shut down
- remove battery displays/etc
- anything…
-
I did flash the `200424` image. I could boot it successfully in the monome shield (200323)
However:
* the display was flipped (upside down)
* the encoder knobs have no effect
* the buttons have no…
-
steps to repro:
- load boingg, which uses PolySub
- press K2 to start a bouncing ball
- navigate back to the top-level menu
- while the voice is active (not on its decay), hold K1 and CLEAR the sc…
-
`time` should be in `util.time`
`tell` should be `crow.tell` or `util.tell`
there's all the C functions (including those 2 above) in libCrow: https://github.com/monome/crow/blob/master/lib/lualink…
-
allow user to paste a link to a zip archive or git repo
-
One day, using RGB LEDs in the hardware would be nice.
In the meantime, get the software working as if RGB LEDs are already present.
Currently, switch LED colors are defined in the ui.xml file.
…
-
this issue captures one primary and one secondary issue. my goal is to sync outboard gear with midi using textbook techniques.
**primary issue: irrational bpm behavior**
1. i am testing with an ar…
-
fm index accepts -5 to +5, not 0 to +5:
https://github.com/monome/crow/blob/2348ecb01ff8603e3fb483a1235ba305d77337b0/lua/ii/wsyn.lua#L56
ramp == sawtooth, right?:
https://github.com/monome/crow/b…
-
i haven't been keeping up with these features, but it seems like parameter types now need to be explicitly made mappable in the param type class. this isn't happening for `Taper`, which is a pretty s…