-
**Description**
1. Interface name and alias
```
admin@tau1t8-01:~$ show interfaces status
Interface Lanes Speed MTU Alias Vlan Oper Admin …
-
---------------
**Describe the bug**
OSPFv2 Default route not visible anymore on neighbors after >20 minutes of running OSPF
(put "x" in "[ ]" if you already tried following)
[x] Did you chec…
-
If zebra rib does not save host routes, there is a problem on the network topology below:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(lo: 1.1.1.1/32) -[R1]-(eth0: 172.24.1…
-
##### ISSUE TYPE
- Bug Report
##### COMPONENT NAME
- ios_config
##### ANSIBLE VERSION
```
Ansible2.5
```
##### CONFIGURATION
##### OS / ENVIRONMENT
- IOS (cisco)
####…
-
**Bug description**
When Zebra notifies Staticd that the recursive nexthop should change (in my case, because a route with a longer prefix exists), nothing happens.
(put "x" in "[ ]" if you alre…
-
NHRP has detected a error with the Strongswan code.
Error 117440513 - NHRP Strong Swan Error.
I have downloaded strongswan from https://git.alpinelinux.org/cgit/user/tteras/strongswan/commit
whic…
-
Hi, i'm testing BFD for rapid OSPF convergence but it seems to me OSPF daemon is ignoring BFD notifications.
This is what i get from BFDd:
```
BFD Peers:
peer 1.1.1.1 interface xe1
…
-
**Describe the bug:**
static route disappear in kernel when I delete the only one IP address of interface.
**To Reproduce**
Steps to reproduce the behavior:
1. add one static route, the interfac…
kwind updated
5 years ago
-
ability to have a nice dump of kernel entries when doing netstat -nrt for instance.
the pacakging of ubuntu18.04 should be changed in order to benefit from following file
```
./tools/etc/iproute…
-
I have created a setup where i'm using mGRE interfaces at HUB and at 2 spokes with FRR(bgpd+nhrpd) and patched strongswan. Two spokes are behind different NAT devices.
Phase 1 tunnles are getting e…