-
I am trying to reproduce the numbers mentioned in https://github.com/ayufan/camera-streamer/blob/main/docs/v4l2-isp-mode.md
I get at best 130ms latency for 120fps on 1280x720, instead of the mentio…
-
Steps to reproduce:
1) Connect USB sound card
2) Open VLC player and start playing some music
3) Disconnect HDMI cable and connect it again
Expected result: music should continue play even with …
qrp73 updated
9 months ago
-
Hi, I am trying to connect the pump board to the RPI through the RJ45 comm's jumper J2. I found the pin-outs for the pump [here:](https://cdn.sparkfun.com/datasheets/Widgets/Bartendro_Dispenser.pdf) a…
-
Currently the CPU temperature range is 40-80C and I can see why, however at lower temperatures the gauge doesn't show anything visual.
What is a way to change the range of that gauge to go from 0C …
-
Hello.
With the html tag `` you can show symbols in the text on the html page. But this tag won't work for me in rpimonitor 2.12-r0. I use the original text form the template `/etc/rpimonitor/templ…
-
**Checklist:**
- [x] I updated to the latest version available
- [x] I checked that my MQTT broker is otherwise working
**Release with the issue:**
**Last working release (if known):**
…
-
### Describe the bug
This issue appeared only with Pi Bookworm OS.
With Bullseye, no changes were required.
A Raspberry Pi 4 running the latest full version of Pi OS Bookworm is unable to boot/ss…
-
First off, thanks for writing this. The placement of the KVM button on the monitor is quite awkward for my setup (left is my Macbook on a stand, middle is the monitor, right is another monitor propped…
-
What about adding support for flow meters so that you can just type in the volume you need for strike and sparge water in CBP? This would be awesome if you´re following the brew steps in BeerSmith. Fo…
-
Hi,MR. Peter Yoon! Thanks for your greate efforct& up to date android 11 nice work for pi!
I build it follow by your instructions ,it takes about 5 hours. and I burn it to RPI4b, it's so exciting tha…