-
#### Description
Configuration:
- 1K sub-interfaces
- each sub interface has 1 IPv4 and 1 IPv6 neighbor
#### Steps to reproduce the issue:
1. sudo warm-reboot
#### Describe the res…
-
**Description**
make list and even make clean will start to build a non-built packages when it is not supposed to do.
It is seen after buster migration
**Steps to reproduce the issue:**
1. Ena…
-
#### Description
This is seen few times when running [test_critical_process_monitoring ](https://github.com/sonic-net/sonic-mgmt/blob/master/tests/process_monitoring/test_critical_process_mon…
-
Hello,
i'm investigating a little bit on this SamplerAddress attribute, as my concern is that it is getting overwritten when passing through a NAT.
It is not read from the netflow payload but from t…
-
#### Description
The Interface index MIB [OID:1.3.6.1.2.1.2.2.1.1] in SONiC starts from 0. As per RFC 1213, the IfIndex should be ranging from 1 to the value of ifNumber.
#### Steps to reproduce t…
-
#### Description
We are seeing crmorch is complaining `Failed to get availability counter` err logs on Dx010 (broadcom) platform.
```
Mar 25 07:41:12.626550 str-dx010-acs-4 ERR swss#orchage…
-
#### Description
I trying to breakout 100GE to 4x25GE but doesn't work
#### Steps to reproduce the issue:
```
admin@sonic:~$ sudo config interface breakout Ethernet0 4x25G
Do you want…
-
#### Description
When a scaled LAG configuration is added and config reload is performed snmpd emits below log before shutting down. 'Jan 2 21:35:03.621782 r-panther-13 ERR snmp#snmpd[21]: i…
-
#### Description
If we disable/enable Option 79 and interface_id in config_db for ipv6 dhcp_relay, there is no difference in captured dhcp-relay packets on server side
#### Steps to reproduc…
-
**Description**
On Celestica E1031 platform. In test case route/test_static_route.py::test_static_route_ecmp when config reload test will fail.
Increased config reload delay test will be pas…