-
When I switch to the LCD12864 simulator, it only shows a blue screen with the text 'LCD12864 simulator'.
After rotating the rotary encoder, the menu of the simulator shows up, but it doesn't load the…
-
### Bug Description
After replacing my mp select mini board with an e3 mini skr board sometimes during a print the board completely freeze with heater on and fan on. Tried both via SD and octoprint…
-
[Configuration.zip](https://github.com/MarlinFirmware/Marlin/files/4378999/Configuration.zip)
### Bug Description
Right now it says:
**ERR: MAXTEMP: BED
PRINTER HALTED
Please Reset**
Every…
-
I’m trying to install this on an SKR 1.4 turbo on my Ender 5 plus. I saw the screen power on but then it slowly faded to black. I can hear the touch screen respond when I press it, but I cant see wha…
-
[Config.zip](https://github.com/MarlinFirmware/Marlin/files/3685896/Config.zip)
At the time of writing, the latest version of Marlin 2 - bagfix is installed.
After executing the G29 command, the…
-
**Description**:
I have updated to the latest version of Marlin. When I run the G29 P1 command on a freshly imaged board, the command stops at point 57/100. This point happens to coincide exactly w…
-
### Bug Description
Continue after Power-Loss, gantry drop, steppers not locking, print resumes at lower height. I think this has to do with the software. When I raise the z height from the screen…
-
Hey there, in the past I often tried to switch to Marlin 2.0 from 1.1.9 but there was always some hinderance.
Eventually I managed to sort out most of it (last was the motor knocking noise where you …
-
I have a BTT TFT35-E3-v3.0 hooked up to a BTT SKR 1.4 Turbo. I followed the online manual to connect all the wires. When my printer is powered on the display will be bright then fades to black within …
N5L04 updated
4 years ago
-
I have a Tevo Tornado running an MKS Gen L 1.0. Probing worked fine in previous releases, but I'm having problems getting it to probe correctly in Marlin 5.0. I enabled Debugging for Probing and I'll …