-
With the demo I have been testing how long we can have our software running with no problems. The code still runs because if the button to our demo is pushed the LCD indicates it. However, a newly reb…
-
I want to customize the firmware, for my motor control board, where can I configure the deadtime?
-
It would be nice to be able to program BLHeli (or other ESCs) through the GCS without having to remove wires from the flight controller. The following is needed to make this work:
1. A software serial…
-
I've ran into an issue with CC3D when I have MainPort occupied by GPS, FlexiPort occupied by I2C mag & baro and need additional serial port for telemetry. I opted for softserial, but it was somewhat u…
-
I'm on Windows 8.1 and I'd like to experiment with embedded systems and contribute. Being an Eclipse newbie followed this guide:
https://github.com/cleanflight/cleanflight/blob/master/docs/development…
-
http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/PF259090
I don't have time for this right now, but it'd be great to port Espruino to it - it's even more of a bargain than the HY boards, and do…
-
Hi,
today i tried RC2, however i am unable to arm, normally i arm with AUX1, after this didn't work, i tried to arm with the left stick (MODE 2). Doesn't work either.
Here is the dump of my settings…
-
Commit 4d69682c9649d48e09ca97c3ec6f23213fdacc82 seems to have broken compilation on my (windows 8) machine :
I get these error messages:
```
Cleaning CC3D succeeded.
make -j ./obj/betaflight_3.0.0_C…
gaelj updated
8 years ago
-
I have been adopting OpenWRT/buildroot for this kind of bare metal development. It gives a versatile build system that is able to cross compile software for microcontrollers just as one would do when …
-
When trying to compile the firmware the make fails with the text below:
```
arm-none-eabi-gcc ../ChibiOS_2.0.8/os/ports/GCC/ARMCMx/crt0.o ../ChibiOS_2.0.8/os/ports/GCC/ARMCMx/STM32F10x/vectors.o ../…