-
Zusätzlich zum Laden eines Fahrzeugs möchte ich evcc auch zum steuern zweier Heizstäbe zur Warmwasserbereitung nutzen. Das ganze soll ausschließlich aus PV Strom und ausschließlich im "Sommerbetrieb" …
-
### Description
Before I had running EBUSD 2 on a RPI with an old EBSD adapter I bought from FEHM forum. It was running super fine for years.
Now I switched to a intel NUC and run EBUSD3 in a contai…
-
Hallo,
es gibt keinen Parameter für die Warmwassertemperatur.
Benutzer Warmwasser zeigt bei der 030_Gemeinsame Einstellung jeweils 2 mal "Warmwassersolltemperatur eingestellt" und "Programmanwahl"…
-
Hi Magnus! Do you use your project with home-assistant? Can you maybe share some more details about the setup? I understand that this is not an "issue" about inetbox2mqtt but would be very happy to ge…
-
Wenn ich die 149 ansteuer kommt es zum Error
wolf.1 | 2020-06-24 20:46:26.630 | error | (4296) uncaught exception: The "list[1]" argument must be an instance of Buffer or Uint8Array. Received ty…
-
Hi guys,
thanks for the homeassistant-Addon.
I was wondering if it is possible to trigger things from homeassistant to the heater.
For example to activate the additional pump you can activate…
-
Hello,
Does anyone has an automation example to share for integrating smart grid feature by using home assistant?
I am looking for something that starts the SG mode when the PV production is abo…
-
Bitte legt Anforderungen für ein Gebäudemodell zum Einsatz für die "simple" Cases dar. Ein Gebäudemodell wird von einem unserer Hiwis erzeugt. Basis ist unser Institutsgebäude.
![1.6](https://git-ce.r…
-
both values are not filled
-
Ich finde alle Datenpunkte nur nicht den der Soll-Warmwassertemperatur Standard der 1. bzw. den SetValue Datenpunkt dazu. Die Warmwassertemperatur ist vorhanden.
Bzgl. Warmwassertemperatur 2 "Schnell…