-
I'm writing this on behalf of a fellow ham. We've been trying to fix the same problem now for two evenings, but we've failed and we're running out of ideas and suspect this might even be a problem in …
-
When wsjtx is running it impossible to edit a record or manually enter a record without it being overwritten or deleted by data coming from wsjtx.
It is inconvenient to stop wsjtx and impossible to u…
-
There are many audio problems with Ubuntu 20.04
At the first run many devices appears in pull-down menu for input/output audio device (but no pulse)
At the second run only first audio device appear …
-
After pulling the container from dockerhub and attempting to run it, the following results:
$ docker run -it --device /dev/snd:/dev/snd -v /tmp/.X11-unix:/tmp/.X11-unix -e DISPLAY=unix:0 hakankoseo…
-
Finished my QDX Rev. 2. and had a hard time to run it :-(
I use JTDX on my (Dell 13") laptop, because JTDX shows twice the number of FT4/FT8 decodes,
compared to WSJT-X, on the left screen. That m…
-
Sorry to open another issue, but I did not want to hijack the other thread. Also, I am not 100% convinced this is an remote audio issue, but need a little help to diagnose it.
```
+--------+ …
-
**Describe the bug**
Background WSPR decoding does not appear to be working.
**To Reproduce**
Ran separate radio w/ WSJT-X, tuned to 40m, no spot uploading, watch spot list.
Openwebrx settings: …
-
WSJTX connects but doesn't control the radio, doesn't even show the actual frequency (Freq is all 0 and red). Status is green, gets yellow, even red, then a popup tells you, that there is no reply whi…
-
Hi,
A number of erroneous SNR reports popped up on wsprnet, all of them reporting version rtlsdr-wspr.
The users report much too high SNR, up to +60 dB.
Let me know if you need examples.
-
## Issue Data goes here (please remove text above):
Your firmware version: D2.12.0
Your bootloader version: 5.0.4
### Hardware
* UI Board: mcHF 0.6.3
* RF Board: mcHF 0.6.3
### Describe…