-
I have been unable to make the AUX switching function work,
I wish to switch an input to an AUX channel.
AtemOSC 2.4.7
Using Sample Template ( Advanced Video Control ) or building my own.
…
-
hi, im running the switcher with a Korg Midi Pad Controller, when i run a DSK auto button it will sometime run again at a random interval after the key press, between 1 and 6 seconds usually.
every…
-
Hi Daniel,
I'll get straight to the point(s):
1. OSC Command for BKGD does not work. I typed correctly /atem//0 (which is the command atemosc advised me to type) but there is no reaction from the …
-
At my organization, we are trying to set up a queuing system, where we can pre-stage video controller changes and run them using OSC messages. The problem is that we want to be able to go from any sc…
-
1. The interface crash while a osc command sent(for exp. by a midi keyboard) before connected to atem switcher.
2. The /transition/auto & /transition/cut not works. I couldn't found any section of co…
-
With the BlackMagic ATEM switchers being a low-cost entry point into HD switching, it might be prudent to add support for the UDP control protocol, documented at http://skaarhoj.com/fileadmin/BMDPROTO…
-
Hi,
Is possible to cue a video like start paused at first frame?
And at the end of the video freeze at the last frame?
I want to use the TBOPlayer as a playout server and that is very usefull.
T…
jmggs updated
8 years ago
-
seems the methods used in the examples are not defined, are these just placeholders for code still in development? I would be very interested if you have any updates.
-
when adding a ATEM switcher (television studio latests firmware)
the client crashes most of the time immediately.
if not it will crash later while adding Atem Cue's
if you try to open the client agai…
-
This is more a request then an issue.
Would be super if there was a function where you could control Auxes on the atem. Like setAux(auxNr, inputNr).
Would gladly assist with this, but the controll…
OB3RG updated
9 years ago