-
__Issues that do not follow this issue template will be closed__
### Description
Print randomly stops as if paused untill power is cycled then asks to resume. If resumed it does not heat and…
-
*Description of the bug or requested feature*
Bug: After leveling bed, homing fails
*Steps to reproduce*
1. Initiate bed leveling, wait until complete
2. Once bed leveling is complete, manua…
-
hi all,
I have to say that this is the only Firmware I got my new Creality CR6 SE got to work.
MANY MANY thanks for this. The official firmwares didnt work. After I got my printer, I did upgrade …
ebeng updated
3 years ago
-
### Description
Bug: Starting a print immediately after running ABL causes nozzle temperature set point to remain at ABL nozzle temperature set point
### Steps to Reproduce
1. Run ABL (used def…
-
###Description
The new Print Screen at CF5 displays the target positions of X, Y and Z in "real" time, but the values appear to be "off" by an order of magnitude.
Suspect the displayed values ar…
-
### Description
If the printer is powered down while the z-axis gantry is still high up (say after completing a tall print) then when the power is restored, the home command no longer brings the ga…
-
Instead of touching the center of the bed, what if the homing bed touch took place at one of the 16 leveling locations? If it touched the front left location (the 1st bed level point), that would give…
-
### Description
Temperature Setpoint Cycles between 120 and 0 during homing and leveling
### Steps to Reproduce
1. Enter Leveling menu.
2. Press Home. (bed is set to 50C, Hot end to 120C),…
-
### Description
If User selects Pause on the Printing Screen, and then selects Tune, when they select Back to return to the Printing (Paused) screen, they are instead returned to the Printing Screen.…
-
### Description
In the bed leveling function, the bed and nozzle are heated to the appropriate temps, the head moves to the first location and then as the nozzle moves downward, the LCD says that t…