-
Hello,
Please find attached a .zip file with my decoder definitions for the SDD-001, which is a DCC-enabled tortoise driver. The SDD-001 is available from BNM Hobbies, here:
http://www.bnm-hobb…
-
Version 4.10 of JMRI can read from Team Digital SRC162 when programming on the main:
…
-
All configs are missing nftable modules needed for router use.
-
I have used kernel version 4.14 and still can not get a ocssd device.
What's the problem?
`./nvme list`
```
root@genericarmv8:~# ./nvme list
Node SN Model …
-
A recent jmriusers discussion indicated that "0" (zero) is a valid DCC++ turnout index, i.e. with the usual defaults the system name DCCPPT0 is valid. "1" and hence DCCPPT1 is acceptable to the code,…
-
Using the Z command to control a pin output was to be fixed in JMRI test version 4.7.2 but yet the problem still exist and has currently been checked off. I have tested this on Linux and Windows using…
-
Hardware: ESU MC2
OS: Android 4.1.1
Engine Driver version: 2.18
JMRI version: JMRI for Raspberry Pi by Steve Todd
DCC: CVP EasyDCC
If it makes a difference: Engine Driver theme used is "High Cont…
-
I thought @KenC57 mentioned this earlier, but can't find the reference.
Potential to affect users of newly-released NCE Signal Decoders.
dheap updated
6 years ago
-
Regardless of the value used for the 'Dark' entry in the head, clicking the Lit will toggle with code 8 as dark. It should use the code matching the 'Dark' value.
Also there should be a way to disa…
-
Hi there
Thanks for your hard work first.(Forgive my poor English plz,I'm just a middle school student in China and English is not my native language.)
I'm trying to port CM13 to my klimttd also as …