-
I'm trying to run a SIP VOIP demo.
My code compiles and flashes, but it crashes whilst running.
This is the log that I see:
Please note I am using Olimex's ESP-ADF board and SIP VOIP demo sof…
-
Hi,
When running VOIP without the addition of the raw buffer, I get voice with Echo from the ESP32.
When adding a raw buffer "delay" between
audio_element_set_multi_output_ringbuf(i2s_stream_wri…
-
I purchased the ESP-ADF along with a MOD-LCD2.8RTP and I haven't been able to get this demo working- i.e. I flash the unit but there is nothing being displayed on the screen.
If there's something I…
-
I followed the guide and installed esp-idf release/4.0 in WSL.
When trying to build the project using idf.pyvand when it tries to link it fails as you can see in the following log.
Checking Python…
-
Hello :)
I am trying to write audio data to a buffer using a LyraT v4.3. The code is the following (from TFL micro speech):
```cpp
i2s_config_t i2s_config = {
.mode = (i2s_mode_t)(I2S_MO…
-
How can we change the active microphone input to be auxiliary input on esp lyrat? I see that it is on adc line 2, however, I could not find any directives on esp adf documentation.
Thanks, for your…
-
ESP-IDF 4.3
ESP-ADF 2.1
--------------------------------------Here is the error message!----------------------------
- -play_bt_source_example.c
1. 'memcpy' forming offset [22, 249] is out of …
-
Hi there. I've had the lyrat for less than a week but I've managed to get some beeps n boops out of it using faust. Just to preface, this is essentially my introduction into embedded systems. I haven'…
-
3个问题,我的DLNA测试,按官方步骤来:
(1)Universal Media Center只能看到设备,点播放键后没反应,然后设备变灰色。换网易云音乐能看到设备,并且耳机听到声音。
(2)但是播放的音乐流有可怕的卡顿,一秒钟左右一下那种,感觉是MCU上的接收缓存机制有问题。
(3)耳机能听到的声音很小,底噪也高,检查了Codec_3V3,看到用了LP2985A-33DBVT来做模拟电源应…
-
https://faust.grame.fr/doc/tutorials/#configuring-the-audio-codec
states no driver support for es8388. [A new pull](https://github.com/grame-cncm/faust/pull/483) suggests that this is no longer the…