-
## Environment
- Development Kit: nodemcu-32-s2
- Kit version (for WroverKit/PicoKit/DevKitC): master
- Module or chip used: esp32s2
- IDF version (run ``git describe --tags`` to find it): v5.0…
-
### The issue
I'm trying to use the SHT3x and SCD4x library's. Which builds correct.
After flashing the ESP_ERROR_CHECK gives an I2C set timeout error. This happens after I2C is initialized and the…
-
### The issue
In get_data_ready_status, data_ready is always being set to true, even when not actually ready.
From the datasheet:
`If the least significant 11 bits of word[0] are 0 → data not rea…
-
### The issue
Since `int32_t` and `uint32_t` have changed for the Xtensa compiler, and the suppression of the corresponding warnings in the ESP-IDF has been disabled, a lot of build errors have appea…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### The issue
I'm testing the BME680 but the pressure value does not change from zero hPa.
I've added a new log print to get the RAW values but no changes at all. I'm in a location over 35 meters fr…
-
### The issue
Hi UncleRus,
I altered the library to read temperature and humidity data from AHT10. Please see the Mail code file and output below. Please help me to solve the problem
############…
-
Hi everybody I have a problem while executing the idf.py menuconfig:
Operation system:Windows 10.
Python Version: Python 3.7.2
The command is: >idf.py --port COM10 -C ./hello_world -v menuconfig
…
-
### Hardware:
Board: ESP32 Dev Module, ESP32C2, ESP32S3 ...
Core Installation version: 2.0.0, 2.0.0-rc2
IDE name: Arduino IDE 1.8.16
Computer OS: …
-
When I try to make the step "python3 build.py build" the process ends with an error:
[1233/1248] Building C object esp-idf/at/CMakeFiles/__idf_at.dir/src/at_ota_cmd.c.obj
ninja: build stopped: sub…