-
Add better detection for GD32F103/GD32F303 chips (the ones i have at least).
Those are MCUs compatible with STM32F103 made by Gigadevice. They also containe some enhancements.
They come with thei…
-
did a fresh clone of heads
pulled and cleaned the ME blobs for xx30
built t430-hotp-maximized roms
flashed top & then bottom
upon booting, my t430 made a continuous beep with microphone and power …
ghost updated
2 years ago
-
> Note: I've tried on both `Windows10` and `Ubuntu 20.04.1 LTS`. The errors described below are the same on both systems.
I'm trying to connect `riscv-none-embed-gdb` - which is part of the xPack R…
-
Hi! This is a continuation of the discussion at https://github.com/platformio/platformio-core/issues/3927
I think the issue might be that on my board, there is actually a CB version of the E103 chi…
-
There's a report of getting a
```
sh: 1: bin/dfu-suffix: not found
```
message during upload, which is because the `~/.platformio/packages/tool-dfuutil` package was never installed: [report](ht…
-
I know its hard for chinese hardware but it would be great if we could assemble a list of supported devices to avoid people blowing up boards like here #32 ..
More specifically I am wondering wheth…
-
Note: I'm working here on Windows10
I'm flashing the `GD32VF103C-START` board with OpenOCD and GDB. It works - but there are lots of warning messages, mostly related to reset issues of the chip.
…
-
- [X] Programmer/board type: Stlink/v2
- [X] Operating system: Ubuntu 18.04.1
- [X] Stlink tools version and/or git commit hash: v1.5.1-15-g3295ab4
- [X] Stlink commandline tool name: st-flash
- […
-
I have static, binary log files which I download via WiFi. Works well most of the time, but then there are perpetual crashes. It seems the success depends on the size of the files. Up to 64k mostly ok…
ullix updated
2 years ago
-
Today - Nov21 - I've tested the following boards on **Windows10**, and I confirm they all flash properly with the GigaDevice OpenOCD fork (and a few modifications applied - see my pull request https:/…