-
### Problem description
shows as manufacture eWeLink CK-BL702-SWP-01(7020) available from amazon ebay ect https://www.ebay.co.uk/itm/314855773062
appears to be working in z2mqtt see here for info …
-
### Problem description
The device is discovered, but with no sensors. I have all connected fine, I can see total and instantaneous power in Tuya app. Where to start?
### Solution description
…
-
### The problem
This problem has been reported in the past, but resolution seems to have stalled.
I am able to use the Emulated Hue to drive my fans and set their speed, so that part is good.
I…
-
### Description
- Hue API version: __version__ = "0.4.8"
- Python version: Python 3.11.6
- Operating System: Arch linux
Thanks for this library !
I'm hooking my lights up to my StreamDeck +,…
-
### The problem
ESPHome Version 2024.2.1
macOS 13.5.1 on M1 Apple Silicon
Python 3.12.2
I am evaluating a Olimex ESP32-POE board and a BME680 temp sensor. Building with the following configurat…
-
Right now Kernel use separate instance of service provider. That make it hard to consume already registered dependencies. It would be nice to have way to use existing service provider. Somet…
-
I'm unsure what happened, but I'm using this node-red integration for my home assistant setup. It was working earlier this morning, but now the Alexa events are no longer firing, even though I haven't…
-
I put some logging in the new polling implemented under https://github.com/home-assistant/core/pull/73659
This PR resolvee https://github.com/home-assistant/core/issues/70043 but has unfortunately c…
-
### Problem description
I have a frustrating issue with this power plug. The first lot of 5 that I installed worked great and the power measurement sensors work accurately and consitently
So 2 w…
-
The next big thing is to build some open hardware sensors for pimatic.
The Quest is to build a hardware 433mhz sender based on arduino or a ATtiny AVRs that collects environment data like light inte…