-
Hi,
the question is, wether the measured data from the sds011 are modified when presented in the madavi-diagrams.
I have tried to build up some diagrams from my own data and compared them with the …
-
Hi,
I bought a few Blueberrye BME280 sensors after seeing them suggested here: https://github.com/opendata-stuttgart/sensors-software/issues/137#issuecomment-331731434
However they arrived with no…
-
Hallo,
habe ein seltsames Problem mit meinem Luftdaten Sensor. Ping geht (dh das Ding verbindet sich auch mit dem WLAN), aber die Webseite und auch die Übertragung der Daten ins Internet ist tot. Das…
-
It seems to me that whenever a host fails to answer in a timely manner, the sensor software crashes and restart rather than timing out and either retrying or moving to the next host.
This has happe…
-
Hi,
my airrohr unit is constantly reconnecting every 2-3 minutes to the WLAN. (I found out when I discovered logs with lots of entries on my FritzBox). It loses connection and then reconnects again…
-
Hi to Jan-Piet and to all the people that like me are excited by his great work on the MQTTWARN project. I'm using MQTTWARN in order to send to a Carbon back-end MQTT topics.
I successfully send on…
-
If the SDS011 sensor has been used before, and the client was not careful, it might not be in the right state to work with the Luftdaten.info-firmware.
The solution would be to always reset the sen…
-
Just for fun, I attached 2 different sensors to my AirRohr LoLin ESP NodeMcu V3
Here the results:
![Difference](https://user-images.githubusercontent.com/1495817/74632552-e5f4f380-515f-11ea-8a62-9…
-
I was using a luftdaten sensor with a DHT22 but I recently switched to a BME280.
I no longer get temperature/humidity data on opensensemap.
I could register a new senseBox but then my data won't b…
-
[Pylint 2.4](http://pylint.pycqa.org/en/latest/whatsnew/2.4.html) introduced a new check: `import-outside-toplevel`.
This check warns when modules are imported from places other than a module top-…