-
I tried to install it on an OrangePi Zero but I get the following error.
```
root@SG-INVERTER:~/mpp-solar# sudo python3 ./setup.py install
/usr/lib/python3.4/distutils/dist.py:260: UserWarning: Unk…
-
pv_input_current appear to be an integer, needs to be a float. Watchpower shows 40W of power at 70v = 0.57a.
mpp-solar shows 0 for pv_input_current if it less than 1amp
version: 0.7.3 on pi4
Linux…
-
Hi,
I have a problem firing it up. I have SKYMAX Inverter, same as Infinisolar, only case is orange not green.
Downloaded software, and when i try to run it:
pi@raspberrypi:~/isv $ sudo ./isv --ge…
-
Do you plan to add the option for grabbing data from this device via the serial RS485 port?
The batteries are installed in a garden shed, BT is out of range. But there is a IP connection available.
…
-
The PC software works ok, whats involved in getting it working with your software?
-
Hi have you tried testing executing POP02 on your inverter?
Some of the inverter does not accept POP02 (SBU)
-
Hi,
I zhink this is also no direct Issue but I can´t install it on Raspi:
`pi@homecontrolx:~ $ sudo python /home/pi/mpp-solar/setup.py install
running install
running bdist_egg
running egg_in…
-
I'm trying to reproduce the code [here](https://pvlib-python.readthedocs.io/en/stable/introtutorial.html) using a 'CECMod' instead of a 'SandiaMod'
So, instead of instantiating
sandia_modules = p…
-
**Describe the bug**
Fronius GEN24 with SM TS65-3 not working.
**To Reproduce**
Config:
```
meters:
- name: grid
type: modbus
model: sunspec
uri: 192.168.1.132:502
id: 200
powe…
-
JK-B2A24S15P Voltages appear to be read/decoded incorrectly.
processInfoRecord(self, record) returns correct info.
processCellDataRecord(self, record) returns incorrect info.
Please see the DEBUG…