-
Windows10
Python 3.9
PyCharm
I just got a SMOS40/S2125 installed. I was able to integrate with Home Assistant and get some readings (hence, TCP MODBUS is working).
If I use the README.md TCP M…
-
### The problem
I enabled register ```47398``` for an SMO40 controller, resulting in entity ```number.room_sensor_setpoint_s1_47398```.
When adding an entity card with it to the dashboard, I can…
-
### The problem
The climate system card shows the system as "Idle", even though the heatpump is producing hot water at the moment. The logbook shows the transition, I verified the state was still "ho…
-
### The problem
I'm running a ESPHome UDP gateway connected to my Nibe F1145 heat pump and added the new Nibe Heat Pump integration in my home assistant installation. I was able to add the integrat…
-
### The problem
When adding the S1255 heat pump it will report back as S1155 with sensors
adding the current power makes the integration stop and unavailable
Logger: homeassistant.components.nib…
-
### The problem
Since #79427, an “Alarm Reset” button should be provided by the integration, however it doesn’t show up for me. Not sure how to debug this myself.
### What version of Home Assistant …
-
Hi,
Not really a bug with your code, but when I try to add a new application to dev.myuplink.com I get an error:
`Callback Url must be a valid URL`
I have entered the following callback url: https:…
-
### The problem
1. Flashed (today 23/12) EspHome onto a https://github.com/Xinyuan-LilyGO/T-CAN485 board
* Instructions from here: https://github.com/elupus/esphome-nibe
* Configuration…
-
Hi,
Are you able to add following calls to your node?
[GET api/v1/systems/{systemId}/serviceinfo/categories]
[GET api/v1/systems/{systemId}/serviceinfo/categories/{categoryId}]
and
[GET api/v1/sy…
-
Hello,
I have the NIBE VVM S320 and F-2120 Heatpump. It uses the new API service (https://dev.myuplink.com).
Is it possible to integrate my system with into HASS also?
Thanks in advance