-
If i do tulip.wifi() at the top of my boot.py USB will fail to initialize. Putting a tulip.time.sleep(5) at the top of boot.py seems to solve this.
Rebooting...
?ESP-ROM:esp32s3-20210327
Build:Ma…
-
## Environment
- Development Kit: ESP32-Wrover-Kit
- Kit version (for WroverKit/PicoKit/DevKitC): [v1|v2|v3|v4]
- Module or chip used: [ESP32-WROOM-32|
- IDF version (run ``git describe --ta…
-
Hello Wolle!
PlatformIO gives an error when building with parameters in platformio.ini:
;board_build.partitions = miniwebradio.csv ; 4MB Flash
;board_build.partitions = miniwebradio8M…
-
## Environment
- Development Kit: [custom board]
- Kit version [custom board]
- Module or chip used: [**ESP32-S3-WROOM-1-N16R8**]
- IDF version : [**ESP-IDF v4.4.1-405-g6c5fb29c2c…
-
Hi,
I'm trying to gauge the size/memory consumption of Matter in order to see if we can incorporate it into our project. I did `idf.py size-components` on the light example and got this:
![image](…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
If using a WROOM-1 dev board (like the N8R8 one I suggest for the breakout or breadboard Tulip) you need to disable Octal Flash in menuconfig's Serial Flasher Config.
For the integrated board and …
-
Using this library on an ESP32-S3 (TinyS3) w/ IDF 5.0.1 (also tried 4.4.4) causes nothing to display on the screen. I've reduced the `main.cpp` file to the below contents:
I've tried both 3.0.8 and…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi, i need help with my Arduino wireless communication with NRF24L01
I am trying to do a 1-1 one-way communication between 2 arduinos using the NRF24L01 module.
On my transmitter side, I have 1 …