-
Hi,
I used an Arduino and and SDC30 to make a CO2 measuring device. I used the Sparfun library and got it to work, but I couldnt really change the measuring interval. The sensor stops always working.…
-
Hi All.
New here so please be gentle :)
I have a new Pi4b with the latest version of Mycodo and Buster and my CCS811 sensor will not read any data. It works fine in Arduino code and also on the C…
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [ x ] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x ] Searched the proble…
-
None of these paths will work on another person's machine. All folders referenced in the path must exist in the repo or someone else who copies and run this repo will run into errors. I didn't check t…
-
Some sensors have very long boot times and/or need to be powered constantly to run calculations between being queried for data. Powering down the Qwiic bus between sleeps causes these sensors to fail …
-
Battery Status does not work as described with Microsoft Laptop Go running Debian Sid
According to the Feature Matrix (https://github.com/linux-surface/linux-surface/wiki/Supported-Devices-and-Feat…
-
I have some sensor data in float values. Is there some way by which I can add it to the JSON object?
-
**Description**
I compiled the kernel with Rust support and tried to boot. However, I am stuck at the emergency shell.
From what I can see in logs, it seems that the modules fail to load. Might be r…
-
v1.2 OLA firmware, no MicroSD card, 10Hz output, SCD30 with no SEL connection.
SCD30 is usually autodetected correctly, but not always. It's most repeatable when SCD30 is first inserted/powered by …
-
Hi,
I'm trying to get a set of 2 SCD30 working with an ESP32.
Since I did not find a way to change the I2C adress of the SCD30, I now try to use the second I2C bus of the ESP32 to get both workin…