-
```
Hi,
I've taken your file device_test.fds and stripped out everything but the
sprinklers (see below). I would like to vary the flow rate over time. I
tried using a controller function from acti…
-
```
Hi,
I've taken your file device_test.fds and stripped out everything but the
sprinklers (see below). I would like to vary the flow rate over time. I
tried using a controller function from acti…
-
I am trying to play a modpack that I created on MultiMC, but half way through loading up, the log just disappears and I'm back at the starting screen... IDK why it is happening. I am attaching the log…
-
I have a Raspberry Pi B+ and a Sainsmart 5v 8 Channel relay module. Is it possible to use OPSi with this setup?
-
I have removed and installed OpenSprinkler-Controller and Sprinklers. Sprinklers works with the new rev but OpenSprinkler-Controller does not want to function with the new OSPi. It tells me that the …
Ron79 updated
10 years ago
-
The `README.md` file talks at long about gpio export requiring root access.
On my 2014-01-07-wheezy-raspbian image (Rapberry Pi B), `/sys/class/gpio/export` is indeed owned by `root`, but gives acces…
-
Well the title says it all.
This is what I get in the logs of OSPy upon clicking "Connect Now" in Sprinklers
``` log
192.168.0.10:57757 - - [19/Sep/2014 01:11:17] "HTTP/1.1 GET /jp" - 303 See Other…
-
Hello,
I would like to ask you to add support for languages (such as language folder and en-GB.ini, cs-CZ.ini ....). I try to keep your system up to date on my website (http://www.pihrt.com/elektro…
-
After I login, if I attempt to toggle the manual mode I am getting the following error flashing on my window. I see the manual mode toggling on and off in a loop.
Error communicating with OpenSprink…
-
It will be preferred to use non-function tied pins for GPIO usage.
D0 and D1 used by the relay shield coincides with the I2C pins which becomes and issue if the user wants to use them to hook other p…