-
Upon loading I get the error message "Please make sure mqtt.py exists in the exports folder"
I can confirm it exists. I've set up the config file with the correct IP for the MQTT server, unhashed t…
-
I replaced all the secrets in the yaml file in order to make the setup easier. After all they are no secrets just an IP and a port number. I suggest you also do that and simplify the documentation acc…
-
Thanks for the rewrite @bohdan-s! I just got around to trying it today. My config is as follows:
```
inverter:
host: sungrow.gateway
port: 8082 # Default for modbus is 502, for h…
-
I had my inverter connected via Wi-Fi until I had time to run an ethernet cable to it. Switched it over to an ethernet connection and iCloudsolar etc continued to work without issue.
But solaroit.p…
-
See: https://github.com/bohdan-s/SunGather/issues/31
-
After installation of the file what is the user supposed to do to get the dashboard? Could you please add that information to the readme?
-
Hey mate,
I'm trying to run SunGather against a SG5K-D with a WiFi V31 dongle.
Modbus seems to not work:
> 2021-12-17 13:47:22 INFO Starting SunGather 0.1.0
> 2021-12-17 13:47:22 INFO …
-
I can see ports 80 and 502 open and can telnet into port 502 fine to confirm a connection can be made but solariot is giving a connection failed. Connecting via wifi. I've tried slave 0x01 through 0x0…
-
Environment: Sungrow Inverter SG8K-D with Wifi Adaptor. Raspi8 with Python 3.8.
Port 502 accessible by scanning.
Error: ValueError: AES key must be either, 24, or 32 bytes lon 16g
I have attemp…
-
```
nmap -p- 172.16.50.116
PORT STATE SERVICE
80/tcp open http
502/tcp open mbap
```
cat config.py
```
inverter_ip = "172.16.50.116"
inverter_port = 502
# Slave Defaults
# Sungrow: …