-
I'm trying to use the Gateway-OS with raspberry-pi and a concentrator from a company in Brazil, the concentrator has the same configuration as RHF0M301, the only difference from the reset pin.
RHF0M3…
-
Hej, w tym wątku chciałbym opisywać po kolei możliwości jakie mamy na rynku. Dzięki temu będziemy mogli wspólnie wybrać najlepsze rozwiązanie dla naszego projektu. Skupie się tu głównie na omówieniu n…
-
### Is this a bug or a feature request?
Neither of both. Contribution.
### What did you expect?
- Make chirpstack-gateway-os to have predefined AS923 MHz configuration files, so that can gateways…
-
I tried simulations using the following configuration with each device sending 100 packets:
Case1: Only one Rx path enabled for 868.3 MHz; Fixed SF=7; Number of devices=1000; Range=1700m
-packets …
-
First of all, thanks for the great tool! It really makes it easy to bind against C code :-)
With my project I'm running into an issue and I'm not sure what is causing it. I'm integrating a C librar…
-
I have nucleo073rz and lora sx1272 shield.
I want to have a lora gateway based on these boards.
I had loaded your sketch in stm32l073rz nucleo board but everehing a had got in terminal is
15:28:08…
-
#### Summary
Support Unmarshalling of SX1301 Conf
#### Why do we need this?
To un-marshal SX1301 Configuration when used stand-alone or as part of packet-forwarder/router config.
#…
-
#### Summary
After sending a downlink to a device the Gateway logs are showing errors delivering the downlink
#### Steps to Reproduce
1. Sent a downlink to the device
ttn-lw-cli applications dow…
-
I'm using rpi3 b+,
-SPI Enabled
-Concentrator connected as per this [this link](https://github.com/ttn-zh/ic880a-gateway/wiki)
-Installed packet forwarder by cloning [this link](https://github.com/…
-
global_conf.json
ERROR
![1573531056(1)](https://user-images.githubuserconten…