-
On freshly installed manjaro, anyt suggestions on what to try?
python3 -m ch55xtool -f build/spi/spi.bin -r
Found CH559 with SubId:17
BTVER:02.40
UID:BE-41-BF-48-00-00-00-00
Erasing chip flash…
-
Hello.
i don't know much about linux...
i have an e173 3g dongle and im trying to get it to work on a raspberry pi 1 b+.
i installed rpi-source from [here](https://github.com/notro/rpi-source/) im …
-
### Describe the bug
We have been experiencing kernel crashes on our Zero 2 W devices at seemingly random instances. We are not quite sure what triggers these crashes, but we see them more often (but…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi there,
I'm currently trying to get a chip working that has idle high clock and trailing edge (so SPI options Polarity 2, Phase 2). Entering this mode after choosing these options works fine, but…
-
Board mostly works, but I found that some GPIO pins can't be accessed, specifically: Pins 4, 5, 17.
When trying to read or write to them, I get an IO error.
In effect, I get the same behavior for 4,…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
With recent 4.8 and 4.10+ kernels I get problems with accessing the TI-chip on an Explorer board
```
# reset_spi_serial.py
Traceback (most recent call last):
File "/usr/local/bin/reset_spi_ser…
-
Hi, i using a board stm32f407vet6 and compiled version of the grblhal activating ethernet, that works correctly when connect first the usb cable and iosender for check boot.
But when not connect th…
-
I've installed 2021.10-004 and 2021.10-003 to SPI and booted them from SD and USB (with SPI erased, eMMC disabled via the switch, and no other bootable devices present). In all cases I get a red power…