-
Hello,
i use your newest V16.4 and have problems to connect. 16.3 works correct.
It runs on a TTGO ESP32-WROVER.
ets_ Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SPI_FAST_FLASH…
-
Hi when i am running:
`flutter run --debug --dart-define=FLUTTER_WEB_USE_SKIA=true
`
Everything working amazing but the image not displaying i am getting this error:
`Another exception was throw…
-
Just a minor documentation update (if you like).
The Goodwe MS Series (mine specifically is a GW8500-MS) (Australia) worked out of the box with the integration.
-
Brownout detector was triggered
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:…
-
some examples and info here: https://github.com/HelTecAutomation/Heltec_ESP32
The question I have is this, I have tried a few libraries to talk to this digipot on pins 21 & 22 of this device. The …
-
The CC2531 does not seem to have as good range as my Xiaomi hub.
Using same type of Xiaomi sensor (new generation reed switch sensor - MCCGQ11LM) I found that the CC2531 is failing to receive updates…
-
测试内容:https://build.openeuler.org/project/show/home:pandora:lxde
测试目的:目前已经初步梳理出了lxde桌面所需要安装的包,但是对这些包的安装顺序、以及在安装过程中所需的安装依赖并不是很确定。因此需要通过实际动手安装去验证、发现、总结问题,最终总结出如果要成功安装lxde,要注意什么问题,怎么去操作(大多是安装顺序、安装依赖等)。…
-
Will you consider adding support for Silicon Labs Zigbee cordinator dongles/sticks via EZSP (EmberZNet Serial Protocol) CLI/API?
It is maybe possible for you to port the EZSP (EmberZNet Serial Prot…
Hedda updated
3 years ago
-
It would help in hacking if we had sharp pictures of all the boards making up Phantom 3 Pro/Adv (both Aircraft and RC).
@notsolowki already prepared photos of camera top board - these are not perfe…
-
**What are you trying to do?**
Run Multipass to launch instances on top of Apple Silicon devices
**What's your proposed solution?**
Restrict multipass on AS to use the [Virtualisation API intrdou…