-
Hi,
Just to let you know that RTL8723BE is working. I have quite a few packet loss, but I don't think it is software related.
I will let you know about further test.
regards
-
Hi, did some work on power consumption, hopefully this can be useful to others.
`###Optimising power consumption
In the world of micro fpv sensible power consumption is important. Below measurem…
-
I think my problem is on my airPi and my wifi board (CSL300 - rt5572)
So I've connected my hdmi screen on it.
The boot is ok, and the wifi board set in monitor mode.
But after that, I see a continu…
Yes21 updated
5 years ago
-
Hello,
Great to see the project!
Did you try WiFi Broadcasting with native Raspberry Pi WiFi card (bcm43430a1 ) with enabled monitor mode via: https://github.com/seemoo-lab/nexmon ?
-
I opened this in an effort to keep things organized and focused. I suggest we discuss submit logos here. I threw this together in 5 minutes but it was just some concepts I had in my head. Obviously wa…
-
Plan to do some wifibroadcast testing with a Pi Zero W with external RT5572 wifi dongle.
Would also like to test DroneBridge. Anything in particular you would like documented? And/or anything to …
-
Ive finally got everything tweaked and running great but for some reason vehicle did not respond to command Arm/Disarm when trying to arm the copter. Any idea what causes this? I can arm fine when c…
-
Seems like newer kernels have strange USB instabilities during card initialization again :(
Happens randomly with the image-builder image and also with my own test-image based on the 1.6RC6 image. …
-
Can you try to do rc passthrough? For example ppm input on ground pi and ppm output on air unit?. That would be great to use this as a module for rc transmitter and have all in one rc control solution…
-
Could the "boot" partition be named "WIFIBRDCAST, like in the legacy 1.6rc6 ?
Yes21 updated
5 years ago