-
```
Currently, the only choice is a two-sided board with thin traces and a big
routing grid. Should have at least a few options;
* two-sided for commercial manufacture
* two-sided for home manufactur…
-
```
If a part (or multiple parts) are selected, the arrow keys (up, down, left,
right) should move the part
over the canvas. The step of movement should be the grid size (*)
* the grid size for bre…
-
```
Currently, the only choice is a two-sided board with thin traces and a big
routing grid. Should have at least a few options;
* two-sided for commercial manufacture
* two-sided for home manufactur…
-
```
This is a collector entry for all issues relating to the
harmonization/synchronization/unification problem.
```
Original issue reported on code.google.com by `andre.knoerig@gmail.com` on 29 Jan …
-
```
This is a collector entry for all issues relating to the
harmonization/synchronization/unification problem.
```
Original issue reported on code.google.com by `andre.knoerig@gmail.com` on 29 Jan …
-
Fritzing 0.9.0b seems to be unable to generate copper/ground fill under Ubuntu 12.04 LTS x64. After selecting the fill options, the progressbar stays here for a few minutes, then fill dialog just clos…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on November 14, 2008 05:19:31_
after (or maybe during) autorouting, remove redundant wire loops
_Original issue: http://c…
-
```
What steps will reproduce the problem?
1.
2.
3.
Attach your sketch file and/or custom part files to the bug report. If the
sketch uses custom parts, save the sketch as shareable (under the file
m…
-
```
What steps will reproduce the problem?
1.
2.
3.
Attach your sketch file and/or custom part files to the bug report. If the
sketch uses custom parts, save the sketch as shareable (under the file
m…
-
_From [w...@hotmail.com](https://code.google.com/u/100552639417915813155/) on January 29, 2013 06:08:03_
What steps will reproduce the problem? 1. load up my design
2. select schematic view
3. select…