-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
I like your work and I want to put a CO2 laser cut with this control instead of Arduino Mega.
I made a test bench. I set the laser mode and what I found information. But while the gcode is running, t…
-
Current TASMOTA version 6.2.1.19 has issue with "Hue Bridge" emulation - it caused Alexa say "Device is unresponsive". It also cannot control in Alexa App.
I have flash it back to version 6.2.1.18 …
-
after update from var. 5.12 to 6.1.1b through Arduino IDE the temp from sensor (GPIO14) not Not displayed , not even zero.
i did choose from setting the right sensor type.
-
I am using H801 analogue PWM outputs (thanks to tasmota) successfully for quite some time now.
As there is one user configurable gpio (GPIO00) i tried to configure & use it as ws2812 digital data li…
-
These are optional elements that should be available to authenticated internal users only. The valid values are below.
SystemOfRecords
EPA-1: PeoplePlus
EPA-3: Wellness Program Medical Records
EPA-9:…
-
### Core Concepts
#### Kronometrix MQTT Databus (MQTT KBUS)
A1. Kronometrix SID, TID, DSID, DEVID are all MQTT KBUS concepts. They have nothing to do with MQTT nor be part of any MQTT topics
…
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
rt400 updated
6 years ago
-
I have a wallmount dimmer. It's a double dimmer with touch buttons. Those buttons are controlled over 433MHz. See my other "issue" where I am building communication with (e.g.) some other 433MHz devic…
-
Hi,
I'm using a Sonoff 4ch Pro r2 with FW 6.1.1. When i restart the sonoff, relay1("POWER1":"ON") is always switched ON. So i tried different combinations with the PowerOnState and the PowerRetain wi…