-
Arduino IDE version : 1.8.5
Arduino core for ST: from STM32duino.com, version=0.1.2
DEV. Board: STM32F103C8T6
OLED driver: SH1106
I used Arduino & u8g2 on ESP32 board for a while without any …
-
Hello, I was trying your image and I have some issues with it.
following the guide from BPI of installing WiringPi & python GPIO and it doesnt run on the board.
the error I get that the applicatio…
-
I was testing your code with a ILI9163 driven display I got from [Elecrow](http://www.elecrow.com/wiki/index.php?title=1.44%27%27_128x_128_TFT_LCD_with_SPI_Interface)
Using your library, the display …
-
Hi all,
Poking around a bit with a Retropie DIY handheld project that was made hugely popular by Adafruit in their PiGRRL series of Raspberry Pi projects. It looks like the display controller, desc…
-
Could be a solution for at least getting a quote
https://www.elecrow.com/pcb-assembly-p-366.html
-
IDE PlatformIO
Device ESP32 dev module
Display Elecrow 1.77" 128x160 TFT display with ILI9163 controller
Works good, but I didn't check all lib functions yet. Max SPI speed is 27Mhz (most likely …
-
https://groups.google.com/d/msg/hermes-lite/xJK3CdW_uV0/1ZSSs5A8AQAJ
-
Hi,
i have a question about a6/a7 future implementation,
You are planning to add call status information?
Something like in this lib:
https://github.com/skorokithakis/A6lib/blob/master/A6lib.h#L30…
-
### Hardware:
Board: DOIT ESP32 DEVKIT V1
Core Installation/update date: 5/sep/2017
IDE name: Platform.io
Flash Frequency: 80MHz
Upload Speed: 115200
### Description:
…
-
Beta2 has tabs to support two enclosure widths. The intent is that these tabs may be broken off for use with the narrower enclosure width. The beta2 boards were fabricated without V-cuts to make this…