-
Hello
I'm using your audio framework
(https://github.com/espressif/esp-adf) on an ESP32-LyraT Development Board hadware.
I would like to know if it is possible to use it to output an i2s audio stre…
-
I'm testing example amazon_alexa with ESP32 Audio Kit
I downloaded ESP Alexa APP ang try to provision, but i got these ERROR from esp log:
[va_button]: button pressed: 36
[conn_mgr_prov]: Provision…
-
Hi,
i'm trying to run an mp3 in _sip_event_handler when SIP_EVENT_RINGING: is on.
I made it:
```#include
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_grou…
-
Hi,
How to add a delay in the Rec channel input of the algorithm stream ?
In this case it would be an I2S stream at 48000.
Regards
Ludo
-
I'm struggling to compile the faust2esp32 so that i can run _faust2esp32 -lib my.dsp_ but it's not working. I'm doing the following in power shell.
```
PS C:\dev\Faust\faust\architecture\esp32> cd C…
-
Hi,
Running the VOIP example on the LyraT, I get following errors :
E (2745) gpio: gpio_install_isr_service(394): GPIO isr service already installed
E (3745) ES8388_DRIVER: es_write_reg error
How…
-
Hi Jorgen, really appreciate the project. I've picked it up to try and get an inexpensive multi-room speaker build based on lyrat boards...
I've forked your code, and begun making it work on my boa…
-
es8388.c文件,void es8388_pa_power(bool enable)函数使能PA,如果gpio超过31则不能正常使能。
原代码 io_conf.pin_bit_mask = BIT(get_pa_enable_gpio())处应改为io_conf.pin_bit_mask = BIT64(get_pa_enable_gpio())
-
Hi!
There are two registers for the ES8388 (reg 40 and 41) which have values assigned to them (0x38 in the user guide, 0x28 on the data sheet), but it's not specified, what these registers are for.
…
-
我测试“noise_suppression”demo时,耳机没有声音,调试串口也没有输出。
使用的是手机耳机接"PHONEJACK"口。
唤醒词选择是nihaoxiaozhi (WakeNet5)。
这个demo需要先唤醒吗?