-
Let's say you have the following in `host_vars` for the switch `myswitch.foo.bar`
```yaml
uplink1: 128.66.0.2/31
uplink2: 128.66.1.2/31
uplink3: 128.66.2.2./31
uplink4: 128.66.3.2/31
```
And …
-
Hi,
I can't exchange evpn routes in vrf anymore since 5.0.
It was working fine last month in 4.1-dev. (don't remember exactly when).
with this simple config:
````
vrf vrf1
vni 4001
!
rout…
-
So, we have the following route:
```# sh bgp l2vpn evpn route vni 70699 mac 5a:00:01:4e:d4:e5
BGP routing table entry for [2]:[0]:[0]:[48]:[5a:00:01:4e:d4:e5]
Paths: (2 available, best #2)
Not…
-
- Node: `ceos Arista cEOS`
- Version: 1.15.2
- Feature: `startup-config`
- Issue details:
When using custom `startup-config` file for ceos the MgmtIPv4PrefixLength, MgmtIPv6Address and Mg…
-
**Issue Type**
- [x] Role enhancement
**Is your feature request related to a problem? Please describe.**
In this time there aren't feature to connect border leaf switches to super spine in 5c…
-
I am testing Frr in a setup like this:
ce1 -- Frr -- R1 -- R2 -- ce2
I am sending traffic packets from ce2 to ce1 after R2 have received type 5 routes from Frr.
The problem is that packets did not …
-
Route reflector
- FRR 7.2.1
5.4.0-65
VTEPs
- FRR 7.5
- KERNEL 4.19.81
Can we use VXLAN BGP EVPN over private LTE?
When I have it running in my lab on a mixture of WLAN and LAN interfaces …
-
## Issue Type
- [x] Bug Report
- [ ] EOS Configuration rendering error
- [ ] Documentation Issue Report
## Summary
In cases where A/A is implemented, we most likely will run unique AS…
-
When one configures VRF-lite with MP-BGP EVPN control plane, there is the need to choose or configure some "EVPN Settings" at the T0 level:
- EVPN Mode
- EVPN/VXLAN VNI Pool
- EVPN Tunnel Endpoint…
-
1. IP tunnels are used in DCs for L3VPNs (L3NM), and in aggregation networks for EVPNs (L2NM). Would be good to add: IP-in-IP, MPLS-in-UDP, VxLAN and Geneve to the list of identityrefs
2. tunnel cha…