-
I can't connect to a JK-BMS. I've tried it with JK adapter, it works with two. I tried it via USB-TTL adapter with two it works. i can´t connect to the oldes one.
root@raspberrypi4:/data/log/dbus-s…
-
Hi,
it is possible to calculate the SOC value, available amps and consumed amps with the driver.
Reason: The values of the JKBMS deviate quite a bit from reality over time due to the "Abnormal rel…
-
### Describe the bug
The new SOC calculation leads to different SOC values shown in the Xiaoxiang app (via bluetooth on iOS) and in dbus-serialbattery.
https://github.com/Louisvdw/dbus-serialbatter…
-
Hey and thanks for your work!
Is it possible to connect the ANT BMS via Bluetooth?
In my setup without victron i have connected the ANT BMS via Bluetooth to my Raspberry Pi. Nodered reads the data…
-
### The problem
Since I updated last dev (03/10/22), compilation process can't find external components. Was still working until 03/07/22
### Which version of ESPHome has the issue?
2022.4.0-d…
-
Sorry for nebwie question. But what exactly i need put into rc.local
I tryed several options to start but nothing happened.
Thank you
-
I can´t get the driver to work, the bms is not connecting.
My Setup:
Raspberry PI 3
Venus OS 2.89
Daly 4s Smart BMS 150a
![image](https://user-images.githubusercontent.com/59644594/180567151-4…
-
Hi,
Really nice work you've done here, was super excited to try it out!
I happen to have a different hardware variant which does both BMS + Active balancing (so the app has options to control ch…
-
Hello and many thanks for the nice driver.
I have 3 packs with 16x280Ah and JkBMS with RasPi and Venus OS.
The driver works an every battery, also the virtual aggregate-battery is shown in the Ven…
-
### Describe the bug
I just update from version v1.0.20230508beta to the last beta, rebooted and the driver is not loaded.
I then tried to start the driver manually with "start-serialbattery.sh"…