-
Inside the Arduino IDE there are these boards
LOLIN(WEMOS) D1 ESP-WROOM-02
LOLIN(WEMOS) D1 R2 & mini
LOLIN(WEMOS) D1 mini (clone)
LOLIN(WEMOS) D1 mini Lite
LOLIN(WEMOS) D1 mini Pro
LOLIN(WeMos…
-
### Basic Infos
- [X] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [X] I have read the documentation at [readthedocs](https://arduin…
-
Hi,
As discussed in the EP3243 thread, I open a new one for 3221 support.
Indeed if both are part of the 3200 series, they have different options and code shouldn't be fully compatible.
EP3221 …
-
### Device Name LOLIN D1 MINI ESP32
Hi, I'm using "lovyanGFX" library whit panel ILI9341 with this board:
- M5Stack CORE2 and library M5Unified
- LOLIN D32 PRO
Everything works perfectly !
I'm …
-
examples/ESP8266_32/SimpleClient/SimpleClient.ino has a dependency on ReconnectingMqttClient.h which includes PJONEthernetTCP.h
PJONEthernetTCP.h is documented to not support the ESP8266
can i g…
-
**Category**
- [x] Hardware / PCB
- [x] Software / ESPHome
**Describe the bug**
Apologies this doesn't appear straightforward!
When booting the board with a Panasonic PIR attached (EKMC160311…
-
Hi,
I have put the esp8266-example.yaml code on my Lolin Wemos D1 Mini v4 and connected it like this:
# RS485-TTL jack (4 Pin, JST 1.25mm pitch)
┌─── ─────── ────┐
│ …
-
BME280 v2 usermod have some issues needs to be resolved.
1. Usermod is not working without connection to MQTT.
2. Most of the latest usermods have "Enable" check mark and it would be wonderful to fo…
-
Hello,
Is it possible to modify the code to work on a ESP8266 based device,like Wemos D1 mini or Lolin ?
For me it is impossible to run more that ~310 LEDs and for sure is the well known limitations…
-
### PROBLEM DESCRIPTION
Sonoff devices with Tasmota firmware refuse to reconnect after power cycling them. As evident by serial output the devices just says "fails to connect to AP".
The only re…