-
There's now a HAL published on crates.io: [`embedded-hal`][] ([Introduction blog post][brave-new-io]). :tada:
[`embedded-hal`]: https://docs.rs/embedded-hal/0.1.0/embedded_hal/
[brave-new-io]: htt…
-
Was hoping to install the GUI to get a minimal example of how you use MQTT to communicate with the Z-stage esp32 and the led matrix esp32. Along the way, I've run into some issues:
In the UC2-env s…
-
Hello, the mainly config like below:
```cpp
#define Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP…
-
Not sure if this is the right place so...
Using Marc's library I'm able to get scrolling text to work across my (self constructed) matrix but only to a point...
Once I enter a width of more than 3…
-
_From [bluearc....@gmail.com](https://code.google.com/u/112158384960039030429/) on September 17, 2013 04:16:29_
This is a space for Fritzing users to upload and share their self-created
parts with o…
-
I want to add LEDs that light up when a button is pressed with 64 buttons matrices method, can you help me with wiring schematic of 8x8 button matrix adding led ?
Here is my code: https://drive.googl…
-
Hi,
I'm new to laser cutting, trying to use the files you provided.
When I upload them to Ponoko, only the dimensions on the clear part of the enclosure passes the laugh test. The files for the lett…
-
I've got a feather nrf52840 express. I've got the firmware compiled and flashed after some trial and error. I flashed Iris default left firmware and I can connect to it and it shows up as a keyboard…
-
Hi,
I'm currently trying to get this to run with an 12x12 ws2812b strip matrix, an esp32 with an SdCard Modul. Everytime I try to get this run I get this error message:
> In file included from …
-
Hi everyone, I've been trying to build my own firmware to fix a sound-neopixel bug, fixed by this:
https://github.com/bbcmicrobit/micropython/pull/607/files
Now, this is a total joke, I've been tr…